Bosch Refrigerator Side-by-side models (Sears PartsDirect chart) E02 Error Code

What the E02 code means

The freezer compartment temperature sensor is defective on side-by-side models in the Sears PartsDirect list. The control cannot read freezer temperature correctly.

Likely causes

  1. failed freezer temperature sensor (side-by-side models) → Shop the temperature sensor at RepairClinic
  2. faulty ice maker (other models)
  3. communication fault in the ice and water controls (other models)
  4. loose or damaged wire harness

How to fix it — step by step

  1. Reset power at the breaker for 30 seconds, as Bosch advises
  2. Note your exact model number (E-Nr) and the code
  3. If the code returns, book a technician - the fix differs completely between the sensor and ice maker families → Shop the ice maker at RepairClinic

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the E02 code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Bosch manual is on Bosch's support site — you'll need your model number.

Find your model number on an inside wall or the ceiling of the fresh-food section. It's the key to the right manual pages and the right parts.

Related Bosch Refrigerator Side-by-side models (Sears PartsDirect chart) error codes

See all Bosch Side-by-side models (Sears PartsDirect chart) codes & guides →