Bosch Refrigerator Side-by-side models (Sears PartsDirect chart) E01 Error Code

What the E01 code means

The refrigerator (fresh food) compartment temperature sensor is defective on side-by-side models in the Sears PartsDirect list. The control cannot read fresh-food temperature correctly.

Likely causes

  1. failed refrigerator compartment temperature sensor → Shop the temperature sensor at RepairClinic
  2. loose or damaged sensor wire harness → Shop the wire harness at RepairClinic
  3. corroded sensor connection

How to fix it — step by step

  1. Unplug the refrigerator or switch off its breaker
  2. If you are comfortable doing so, check the sensor harness connection in the upper right corner of the refrigerator compartment and reconnect it if loose
  3. Restore power; if E01 returns, book a technician to replace the sensor or harness - do not open the sealed system

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the E01 code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Bosch manual is on Bosch's support site — you'll need your model number.

Find your model number on an inside wall or the ceiling of the fresh-food section. It's the key to the right manual pages and the right parts.

Related Bosch Refrigerator Side-by-side models (Sears PartsDirect chart) error codes

See all Bosch Side-by-side models (Sears PartsDirect chart) codes & guides →