Bosch Oven E118 Error Code

What the E118 code means

Cooling fan supervision error for cavity 1 on 300, 500 and 800 Series built-in wall ovens (E218 for cavity 2): the cooling fan speed is too low or too high, or its Hall effect sensor is not detecting rotation.

Likely causes

  1. cooling fan failing or obstructed
  2. wire harness touching the motor or pinched
  3. Hall effect sensor connection loose
  4. plenum touching the fan end cap

How to fix it — step by step

  1. Turn the oven off at the breaker for 30 seconds and restore power
  2. Listen for the cooling fan after use; if it is silent or noisy and the code returns, stop using high-temperature modes
  3. Book a technician to check the fan, harness and Hall sensor

Parts that commonly fix the E118 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Bosch oven error codes

See all Bosch oven codes & guides →