BMW SUV X7 (G07, 2019–2026) Oil leak from oil filter housing
What this problem usually means
The B58 engine in the X7 xDrive40i uses a polycarbonate (plastic) oil filter housing that integrates a coolant-to-oil heat exchanger. The housing can crack or its gasket can fail from heat cycling, leaking oil and/or coolant.
Likely causes
- Plastic oil filter housing cracked from heat cycling
- Oil filter housing gasket failure → Shop the oil filter housing gasket at Amazon
How to fix it — step by step
- Look for oil and/or coolant around the oil filter housing and check both fluid levels → Shop the oil filter housing at Amazon
- Clean the area and re-check after a drive to confirm the housing as the source
- Replace the housing and/or gasket as confirmed
- Re-check for leaks and correct oil and coolant levels after a road test
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the oil filter housing.
Shop the oil filter housing at Amazon
Also tied to this fault: oil filter housing gasket - Shop at Amazon
Parts that commonly fix it
- oil filter housing - Shop at Amazon
- oil filter housing gasket - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.