BMW SUV X7 (G07, 2019–2026) Loss of brake assist - integrated brake module
What this problem usually means
On the X7 M60i (G07), the integrated braking system (IBS) module can lose hydraulic brake assist: the driver keeps mechanical braking but needs significantly more pedal pressure, increasing stopping distances, and ABS and DSC can be cut at the same time. Two BMW brake campaigns have windows overlapping M60i production - one for electronic signal interference in the IBS module, and one for an incorrectly welded servomotor hollow shaft that can break under high braking pressure, whose remedy is replacement of the hydraulic brake unit.
Likely causes
- IBS module electronic signal interference cutting hydraulic brake assist, ABS and DSC
- Incorrectly welded IBS servomotor hollow shaft breaking under high braking pressure
How to fix it — step by step
- Treat a suddenly hard brake pedal or brake/ABS/DSC warnings as a stop-and-check fault
- Check with a BMW dealer which brake campaigns apply to your VIN and whether the remedy is complete
- Have the hydraulic brake unit replaced where the weld campaign applies
- Confirm normal pedal feel and no brake warnings after the remedy
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the integrated brake unit.
Parts that commonly fix it
- integrated brake unit - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.