BMW Coupe 4 Series Water pump failure

What this problem usually means

Water pumps on modern BMWs tend to start failing between 50,000 and 100,000 miles, and the issue is still fairly common on the N20, N55 and S55 engines used in the 4 Series, as well as the newer B48 and B58. The thermostat is a common companion weak point, sticking open or closed at around the same time. Signs of a failing electric water pump include the cooling fan constantly running at high speed, an engine temperature warning, trouble code 2E83 (electrical cooling pump, low power mode), the pump running all the time (which drains the battery) and coolant leaks.

Likely causes

  1. Electric water pump wearing out at 50,000-100,000 miles
  2. Thermostat sticking open or closed at similar mileage

How to fix it — step by step

  1. Watch for a temperature warning, a fan running constantly at high speed, or a pump that runs on and drains the battery
  2. Scan for code 2E83 and check the coolant level
  3. If a temperature warning appears, pull over and let the engine cool for around 30 minutes before driving further
  4. Replace the water pump with a new OEM unit, and the thermostat at the same time → Shop the water pump at Amazon → Shop the thermostat at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related BMW Coupe 4 Series problems

See all BMW 4 Series codes & guides →