BMW Coupe 4 Series PCV valve failure
What this problem usually means
A torn PCV valve is a common higher-mileage 4 Series issue, typically affecting 2014 to 2019 cars (428i, 435i and early 440i). The PCV valve is a rubber diaphragm that regulates crankcase pressure; when it tears, pressure builds excessively. Symptoms include white smoke from the exhaust, a howling, whistling or squealing noise at idle, and leaking front or rear main seals. The PCV valve is integrated into the valve cover, so dealers normally replace the entire valve cover; aftermarket PCV repair kits also exist.
Likely causes
- Torn PCV diaphragm integrated in the valve cover
- Excess crankcase pressure blowing out the main seals
How to fix it — step by step
- Listen for howling/whistling at idle and watch for white exhaust smoke
- Check for oil leaks at the front and rear main seals, which point to excess crankcase pressure
- Replace the valve cover (the dealer fix) or fit an aftermarket PCV repair kit → Shop the valve cover at Amazon
- Re-check idle noise and seals after the repair
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the valve cover.
Shop the valve cover at Amazon
Also tied to this fault: pcv valve - Shop at Amazon
Parts that commonly fix it
- valve cover - Shop at Amazon
- pcv valve - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.