Blueair Air purifier Blue Pure 211i Max Indoor air quality is not improving
What this problem usually means
My indoor air quality is not improving, per the Blue Pure 211i Max troubleshooting table.
Likely causes
- Indoor air quality is polluted
- Air quality sensors are dusty and showing incorrect levels
How to fix it — step by step
- Disconnect the power cable from the wall outlet and wait approximately 30 seconds
- Make sure there are no objects or dust around the air quality sensors at the back of the air purifier
- Reconnect the power cable and press the power button
- If the air quality does not improve with use of the purifier and with ventilation, contact Blueair
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.