Blueair Air purifier Blue Pure 211i Max Filter replacement indicator (red circle)
What this problem usually means
A red circle / red filter replacement indicator on the panel means it is time to change the main filter. It occurs some time between 6 and 9 months of operation, depending on usage and air quality conditions.
Likely causes
- Main filter has reached its recommended life (6-9 months of operation)
How to fix it — step by step
- Turn off the air purifier and unplug it, rotate the top counter-clockwise to unlock and lift it off
- Remove the fabric pre-filter and the silencer
- Use the filter handles to pull out the old filter and fit a new one, removing its plastic wrapping first
- Place the silencer back on top of the filter and pull the fabric pre-filter up over the filter and silencer, with the leather tag on the upper side
- Twist the top back on, plug in and turn the purifier back on
- Reset the filter indicator: press down the Fan Speed button for about 15 seconds (until all the LEDs of the interface light up for the second time and blink once), then release - if done correctly the red indicator blinks three times and then disappears
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the particle & carbon filter.
Shop the particle & carbon filter at Amazon
Also tied to this fault: washable fabric pre-filter - Shop at Amazon
Parts that commonly fix it
- particle & carbon filter - Shop at Amazon
- washable fabric pre-filter - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.