Audi SUV Q3 (8U, 2015–2018) Side marker lights not working
What this problem usually means
Some 2015-2017 Q3s (along with other Audis) may have received software that makes the side marker lights stop working with the parking lights or headlights, which fails federal lighting standard FMVSS 108. This is NHTSA recall 16V642 (79,895 vehicles campaign-wide); dealers reload corrected software.
Likely causes
- Software update disabling the side marker lights with parking lights/headlights
How to fix it — step by step
- Walk around the car with the headlights on and confirm whether the side markers light
- Run your VIN through NHTSA's recall lookup and confirm whether the 16V642 remedy shows as complete
- Ask an Audi dealer for the repair order showing the recall work
- Have the dealer reload the corrected software if the recall is still open
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.