Audi SUV Q3 (8U, 2015–2018) No warning when front turn signal fails
What this problem usually means
On 2016-2018 Q3s with LED headlights, an inoperable front turn signal may not trigger a dash indicator, so the driver may not know the signal is out. This is NHTSA recall 19V385 (23,241 vehicles campaign-wide); dealers update the body control module.
Likely causes
- Body control module software not flagging a failed LED front turn signal
How to fix it — step by step
- Check both front turn signals on a walk-around rather than relying on the dash indicator
- Run your VIN through NHTSA's recall lookup and confirm whether the 19V385 remedy shows as complete
- Have the dealer update the body control module if the recall is still open → Shop the body control module at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the body control module.
Parts that commonly fix it
- body control module - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.