Audi Sedan A6 Passenger airbag sensor failure
What this problem usually means
Audi recalled 139,249 sedans including 2012-2018 A6 models because the passenger occupant detection system (PODS) sensor can wear and fail, which may prevent the front passenger airbag from deploying properly in a crash. The fix is a replacement sensor fitted with a protective cover.
Likely causes
- Worn passenger occupant detection system (PODS) sensor → Shop the passenger occupant detection sensor at Amazon
- Damage to the seat occupancy sensing system
How to fix it — step by step
- Run your VIN through Audi's recall lookup or the NHTSA recall site to see whether your car is covered and whether the repair is still open
- Watch for an airbag warning light or a passenger airbag off message with an adult seated in the front passenger seat
- Do not place objects on the passenger seat or attempt to repair seat sensing components yourself
- Have the dealer replace the faulty sensor and fit the protective cover; recall repairs are performed free of charge
- Confirm the recall shows as completed in the vehicle's records afterwards
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the passenger occupant detection sensor.
Parts that commonly fix it
- passenger occupant detection sensor - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.