Audi Sedan A6 Electrical system malfunction warning

What this problem usually means

Newer A6 models (mostly 2017 onward) can display an 'Electrical System Malfunction' warning with a red or yellow battery icon, and the car can become inoperable and need towing. The usual cause is failure of the DC-to-DC voltage converter that steps 48 volts down to 12 volts in the mild-hybrid system; a common fix is replacing the 48V battery and the belt starter-generator.

Likely causes

  1. Failed 48V-to-12V DC-to-DC voltage converter
  2. Failed 48V battery
  3. Failed belt starter-generator (alternator unit) → Shop the belt starter generator at Amazon

How to fix it — step by step

  1. If the warning appears with a battery icon, avoid driving further than necessary; the car can shut down completely
  2. Do not jump-start or disconnect batteries on a 48V mild-hybrid system as you would on a conventional 12V car
  3. Note any other symptoms, such as headlights stuck on or a total loss of electrics, for the technician
  4. Have the 48V system diagnosed with Audi-specific equipment; the converter, 48V battery and generator are the documented suspects → Shop the 48v battery at Amazon
  5. Repairs are dealer or specialist work on the 48V system

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Audi Sedan A6 problems

See all Audi A6 codes & guides →