Audi Coupe A5 Fuel pump control module failure

What this problem usually means

Early first-generation A5s with the 2.0L engine have a fuel pump control module that often fails from overheating: the module's electronics break down from the excess heat and make it run continuously, and in time the faulty electronics also damage the fuel pump. Symptoms include an EPC light, a very hot module, codes P3045, P3044 or P0087, a drained battery, stalling, hesitation and a car that won't start. The module is the fuel pump's power supply, so replacing the pump alone will not fix a car whose module is broken; in many cases the old pump works again once the module is replaced.

Likely causes

  1. Fuel pump control module electronics failing from overheating
  2. Fuel pump damaged by the faulty module running it continuously

How to fix it — step by step

  1. Scan for P3045, P3044 or P0087 and check whether the module (under the rear seat area) is abnormally hot
  2. Replace the fuel pump control module first; test the existing pump before replacing it → Shop the fuel pump control module at Amazon → Shop the fuel pump at Amazon
  3. Replace the fuel pump only if it still fails to deliver with a good module
  4. Confirm clean starting and no EPC light afterwards

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Audi Coupe A5 problems

See all Audi A5 codes & guides →