Audi Coupe A5 Carbon buildup
What this problem usually means
The first-generation A5 suffers carbon buildup around the intake valves on its direct-injection engines - the 2.0L TFSI and 3.2L V6, and also the S5/RS 5's 4.2L V8 and supercharged 3.0L V6. Because fuel is sprayed directly into the combustion chamber, none flows past the backs of the intake valves to wash deposits away. Symptoms are misfires, poor fuel economy, shaking or vibration at higher RPM, limp mode and a check engine light. The effective cleaning method is professional walnut blasting of the intake valves, typically every 60,000 to 100,000 miles.
Likely causes
- Carbon deposits on intake valves from direct injection
- PCV oil vapour contributing to deposit formation
How to fix it — step by step
- Scan for misfire codes and note rough running or power loss
- Rule out ignition coils and spark plugs on the flagged cylinders first
- Have the intake ports inspected to confirm deposits before paying for cleaning
- Have the valves walnut-blasted by a specialist; premium fuel slows but does not stop recurrence
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the intake manifold gasket set.
Parts that commonly fix it
- intake manifold gasket set - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.