Amana Washer Front-Load and Top-Load HE Sud Error Code
What the Sud code means
There are excessive suds in the washer. Always use HE (High-Efficiency) detergent in this washer.
Likely causes
- Too much detergent
- Non-HE detergent used
- Restricted drain hose slowing suds removal
How to fix it — step by step
- Let the washer run its suds-reduction routine and finish rinsing
- Use only HE detergent, measured for the load size
- Check the drain hose is not kinked or clogged
- Run the next load with less detergent
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the Sud code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Amana manual is on Amana's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.