Amana Washer drn Error Code

What the drn code means

The washer is not draining properly. Amana notes this can sometimes be an installation problem with the drain hose.

Likely causes

  1. Drain hose kinked, clogged or installed incorrectly
  2. Standpipe too high, too low or hose pushed too far in
  3. Blocked drain pump

How to fix it — step by step

  1. Check the drain hose for kinks and clogs
  2. Check the hose is not pushed too far into the standpipe and the height is correct
  3. Remove and rinse out any blockage you can reach
  4. Restart the cycle and watch a full drain

Parts that commonly fix the drn code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Amana washer error codes

See all Amana washer codes & guides →