Acura SUV RDX (TC1/TC2, 2019–2020) Seat Belt Buckle Won't Latch — Recall
What this problem usually means
Safety recall 23V158 covers 2019–2020 RDX: the front seat belt buckle channel was manufactured out of specification and can interfere with the release button, preventing the buckle from latching — leaving the occupant unrestrained. Honda's remedy is free replacement of the buckle release buttons or buckle assemblies on both front seats.
Likely causes
- Out-of-specification buckle channel manufacturing
- Release button interference preventing latch engagement
- Wear making an intermittent latch worse
How to fix it — step by step
- Test both front buckles repeatedly — a buckle that latches only sometimes is already failing
- Check your VIN at nhtsa.gov/recalls for campaign 23V158
- Do not rely on a buckle that fails to latch; use another seating position until repaired
- Have the dealer replace both front buckles free and confirm both were done on the repair order
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the seat belt buckle assembly.
Shop the seat belt buckle assembly at Amazon
Also tied to this fault: seat belt buckle release button - Shop at Amazon
Parts that commonly fix it
- seat belt buckle assembly - Shop at Amazon
- seat belt buckle release button - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.