Acura Sedan TLX (UB5/UB6/UB7, 2021–2025) Brake Pedal Feels Loose or Travels Too Far — Recall

What this problem usually means

Safety recall 25V391 covers 2021–2025 TLX (and 2023–2025 MDX): the brake pedal pivot pin can work loose, making the pedal feel loose or wobbly and increasing pedal travel before the brakes bite — 259,033 vehicles recalled across the whole campaign, which also includes the Honda Pilot. A loose pivot pin can also cause unintended brake light activation or, in the worst case, reduced braking.

Likely causes

  1. Brake pedal pivot pin not properly secured at assembly → Shop the brake pedal pivot pin at Amazon
  2. Pivot pin walking out of its bore over time
  3. Worn pedal pivot bushings

How to fix it — step by step

  1. Check for side-to-side pedal wobble by hand — any looseness is a stop-and-call symptom
  2. Check your VIN at nhtsa.gov/recalls for campaign 25V391
  3. Have the dealer inspect and secure or replace the pedal assembly free under the recall
  4. Do not drive with a loose pedal — have the vehicle towed if travel is excessive

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Acura Sedan TLX (UB5/UB6/UB7, 2021–2025) problems

See all Acura TLX (UB5/UB6/UB7, 2021–2025) codes & guides →