Whirlpool Washer Duet Alpha (Front-Load) F0 E1 Error Code
What the F0 E1 code means
A load was detected in the drum during the Clean Washer cycle, which must run empty.
Likely causes
- Clothes or items left in the drum during Clean Washer cycle
- Items added after the cleaning cycle started
How to fix it — step by step
- Remove all items from the drum
- Restart the Clean Washer cycle with the drum completely empty
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the F0 E1 code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Whirlpool manual is on Whirlpool's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.