Whirlpool Refrigerator Demo Error Code
What the Demo code means
Demo / showroom mode is on (display may read Demo, Showroom or Shwrm): the display and lights work normally but the compressor and fans stay off or barely run, so nothing gets cold. It is a retail display setting, not a fault.
Likely causes
- Former store display unit installed without exiting demo mode
- Demo mode turned on accidentally by a button combination
- Cooling-off button sequence used instead of the demo exit sequence
How to fix it — step by step
- Find your model's demo exit sequence in the owner's manual - it varies by control type
- Common Whirlpool methods hold a pair such as LIGHT + LOCK, or FREEZER TEMP + REFRIGERATOR TEMP, for 3-5 seconds until the display counts down
- Confirm the Demo / Showroom wording clears and cooling starts, then recheck temperatures after a few hours
Parts that commonly fix the Demo code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.