Whirlpool Dishwasher Current models (Whirlpool Product Help platform) F8 E1 Error Code

What the F8 E1 code means

No water detected at the dishwasher: on current models this fault is also shown as H2O and the cycle pauses.

Likely causes

  1. Clogged filter, drain hose or drain pump (slow-drain platform) → Shop the drain pump at RepairClinic
  2. Water supply off or fill hose kinked (current platform)
  3. Defective drain pump

How to fix it — step by step

  1. Remove and rinse the filters under running water
  2. Check the drain hose for kinks or clogs and clear the sink disposer / air gap
  3. Make sure the water supply is on and the fill hose is not kinked
  4. If the code returns, schedule service

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the F8 E1 code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Whirlpool manual is on Whirlpool's support site — you'll need your model number.

Find your model number on the tub edge inside the door. It's the key to the right manual pages and the right parts.

Related Whirlpool Dishwasher Current models (Whirlpool Product Help platform) error codes

See all Whirlpool Current models (Whirlpool Product Help platform) codes & guides →