Volvo Wagon V90 Cross Country (Second generation, 2016–2024) Excessive oil consumption (T6 petrol)

What this problem usually means

Volvo's 2.0-litre Drive-E petrol engines — particularly the twin-charged T6 in 2016–2018 cars — drew significant criticism for excessive oil consumption, with the oil level dropping noticeably between service intervals and some owners topping up a litre or more before the next service. Later production engines appear largely corrected.

Likely causes

  1. Piston ring design in early Drive-E units
  2. Crankcase ventilation calibration in early Drive-E units

How to fix it — step by step

  1. Check the oil level cold — a level below minimum with no top-up record is a red flag for ring wear
  2. Top up and monitor the level every 3,000–5,000 km to establish the consumption rate
  3. Have a specialist confirm excessive consumption over a measured interval
  4. Confirmed cases need piston ring replacement — a very expensive engine-out repair out of warranty

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Volvo Wagon V90 Cross Country (Second generation, 2016–2024) problems

See all Volvo V90 Cross Country (Second generation, 2016–2024) codes & guides →