Volvo SUV XC60 PCV Diaphragm Failure and Rough Idle

What this problem usually means

First-generation XC60s with the SI6 inline-six (3.2 and 3.0 T6) are mechanically durable - timing chain, iron liners - and their common failure points are external, led by the oil filter housing PCV diaphragm / oil trap. A torn diaphragm upsets crankcase ventilation: the engine idles roughly, may whistle, and oil leaks follow if crankcase pressure/vacuum goes unmanaged. The READ (rear end ancillary drive) bearing is the other named watch item on these engines, whining after about 150,000 miles.

Likely causes

  1. Torn PCV diaphragm in the oil filter housing / oil trap box on SI6 engines
  2. Cracked or perished PCV hoses → Shop the pcv hoses at Amazon
  3. Sludged oil trap box on neglected cars
  4. READ bearing wear (whine) as a separate noise that must not be confused with PCV whistle

How to fix it — step by step

  1. Listen for a whistle that stops when the oil filler cap is loosened - the classic crankcase ventilation test
  2. Scan for lean/rough-idle fault codes and check for oil leaks starting at the same time
  3. Replace the oil trap / PCV diaphragm assembly and any perished hoses as a set → Shop the pcv diaphragm at Amazon
  4. Recheck idle quality and crankcase vacuum after the repair
  5. If a whine persists and tracks engine speed, have the READ bearing assessed separately

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Volvo SUV XC60 problems

See all Volvo XC60 codes & guides →