Volvo SUV XC40 Oil consumption
What this problem usually means
The XC40's Drive-E engines share the family's piston-ring oil consumption problem: the known piston ring issue of the early generation applies especially to vehicles built before the 2019 production update. Symptoms are a dropping oil level without a visible leak, occasional blue smoke, and consumption above about 0.5 litres per 1,000 km. Running the engine low risks bearing wear and turbocharger oil starvation.
Likely causes
- Clogged or undersized piston oil control rings → Shop the piston rings at Amazon
- PCV system faults contributing to consumption
How to fix it — step by step
- Check the oil level on the dipstick or electronic gauge regularly and log top-ups against mileage
- Rule out external leaks before concluding the engine is burning oil
- Watch for blue smoke, particularly under load
- Have a dealer perform an oil consumption test if use is clearly above normal
- Confirmed ring problems require piston and ring work; keep the oil topped up in the meantime and never run it low
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the piston rings.
Shop the piston rings at Amazon
Also tied to this fault: pcv valve - Shop at Amazon
Parts that commonly fix it
- piston rings - Shop at Amazon
- pcv valve - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.