Volkswagen SUV Tiguan Overheating Error Code
What the Overheating code means
The 2.0 TSI Tiguan's EA888 engine uses a plastic-impeller electric water pump known to fail across the VW Group: the impeller can delaminate from its shaft, causing a silent loss of coolant circulation and sudden overheating without a visible leak. The thermostat is also a known weak point, and both components should be replaced together on a higher-mileage car, ideally with the updated metal-impeller pump.
Likely causes
- Water pump impeller delaminating from its shaft
- Thermostat failure
How to fix it — step by step
- If the temperature gauge spikes, stop safely, switch off and let the engine cool; never open a hot cooling system
- Check the coolant level once cold and look for leaks, while remembering this failure often shows no visible leak
- Have the cooling system tested to confirm pump circulation rather than guessing from the gauge
- Replace the water pump and thermostat together, specifying the updated metal-impeller pump → Shop the water pump at Amazon → Shop the thermostat at Amazon
- Refill and bleed the system with the correct coolant and monitor temperatures on the next drives
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the water pump.
Also tied to this fault: thermostat - Shop at Amazon
Parts that commonly fix the Overheating code
- water pump - Shop at Amazon
- thermostat - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.