Volkswagen Sedan Passat Uneven Tire Wear
What this problem usually means
Uneven tire wear or a subtle directional pull on a Passat often traces back to a worn control arm bushing, per CarCareTotal, and catching it at the bushing stage costs a fraction of a full control arm assembly replacement once metal-to-metal contact has begun generating wear debris. Alignment should always follow suspension work.
Likely causes
- Worn control arm bushings allowing alignment angles to shift
- Control arm damage after bushing failure progresses
- Incorrect wheel alignment from other causes
- Tire pressure or rotation neglect producing simpler wear patterns
How to fix it — step by step
- Inspect the tire wear pattern: inner or outer edge wear supports a geometry problem
- Check pressures and rotation history first to rule out the free causes
- Inspect control arm bushings for cracking and play on a lift → Shop the control arm bushings at Amazon → Shop the control arm at Amazon
- Replace worn bushings or arms and have a full wheel alignment done afterwards
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the control arm bushings.
Shop the control arm bushings at Amazon
Also tied to this fault: control arm - Shop at Amazon
Parts that commonly fix it
- control arm bushings - Shop at Amazon
- control arm - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.