Volkswagen Sedan Jetta Engine stalls while driving
What this problem usually means
Volkswagen recalled certain 2019-2020 Jettas (recall 23V604000, VW code 28H7) because the conventional ignition switch polyfuse is prone to failing in high-temperature environments. The failure can make the engine stall suddenly while driving, with a loss of power and an increased crash risk. The remedy is dealer replacement of the ignition switch.
Likely causes
- Failing ignition switch polyfuse, especially in high temperatures
How to fix it — step by step
- If the engine stalls while driving, get to a safe place, shift to neutral if needed, and restart only when it is safe to do so
- Check your VIN on VW's recall site or NHTSA to see whether recall 23V604000 covers your car
- Do not attempt to bypass or repair the ignition switch yourself on a recalled car → Shop the ignition switch at Amazon
- Have a VW dealer replace the ignition switch free of charge under the recall
- Confirm the recall shows completed in the vehicle's records
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the ignition switch.
Parts that commonly fix it
- ignition switch - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.