Volkswagen Hatchback Golf GTI Timing chain tensioner failure

What this problem usually means

On the Mk6 GTI's 2.0L turbo engine, the timing chain tensioner regularly fails: as the chain and tensioner wear, tolerances loosen and the original guide ring and tension cylinder prove inadequate, with some failures occurring under 5,000 miles. When the tensioner fails, the valves come into contact with the pistons and destroy the engine. Volkswagen revised the design with a thick metal plate instead of the flimsy ring, but the chain and tensioner remain wear items.

Likely causes

  1. Worn timing chain tensioner with an inadequate original guide design → Shop the timing chain tensioner at Amazon
  2. Timing chain stretch with age and mileage → Shop the timing chain at Amazon

How to fix it — step by step

  1. Listen for rattling on cold starts, the earliest audible warning of chain slack
  2. Scan for camshaft correlation codes and note any misfires or hard starting
  3. Do not drive a car with a persistent rattle; a jumped chain destroys the engine
  4. Have a VW specialist inspect the tensioner and measure chain stretch
  5. Replace the tensioner and chain with the revised-design parts

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Volkswagen Hatchback Golf GTI problems

See all Volkswagen Golf GTI codes & guides →