Toyota SUV RAV4 Check engine light from EVAP canister failure
What this problem usually means
RAV4s from nearly every generation are reported to release charcoal pellets from the EVAP canister, which plug the vent valve and set a check engine light. CarBuzz, summarizing RepairPal reports, gives the usual fix as replacing the entire canister; the fault also causes emissions-test failure.
Likely causes
- Charcoal pellets released from a deteriorating EVAP canister → Shop the evap charcoal canister at Amazon
- Plugged EVAP vent valve → Shop the evap vent valve at Amazon
- EVAP system leaks
How to fix it — step by step
- Tighten the gas cap and clear the code to see if it returns
- Have the codes read to confirm an EVAP vent fault such as P0446
- Have a shop smoke-test the EVAP system
- Replace the EVAP canister assembly with its valves
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the evap charcoal canister.
Shop the evap charcoal canister at Amazon
Also tied to this fault: evap vent valve - Shop at Amazon
Parts that commonly fix it
- evap charcoal canister - Shop at Amazon
- evap vent valve - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Toyota manual is on Toyota's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.