Toyota Sedan Corolla (E140/E150, 2009–2010) Overheating Error Code

What the Overheating code means

Water pump failure is a commonly reported Corolla problem, particularly on 2009-2010 cars, typically showing up around 60,000-80,000 miles with coolant leaks and bearing noise before it causes overheating. A Corolla that overheats should be checked for a weeping, noisy water pump before anything more serious is assumed.

Likely causes

  1. Failing water pump (leak at the weep hole, bearing noise)
  2. Low coolant from a hose or radiator leak
  3. Stuck thermostat
  4. Failed radiator fan or fan relay

How to fix it — step by step

  1. Stop driving if the gauge is in the red; continued driving turns a pump job into a head gasket job
  2. When the engine is cold, check the coolant level in the reservoir and radiator → Shop the coolant at Amazon
  3. Inspect the water pump area for pink crusty residue at the weep hole and listen for grinding or whining from the pump bearing → Shop the water pump at Amazon
  4. Confirm the radiator fan runs when the engine is hot and the A/C is on
  5. Replace the water pump and thermostat together if the pump is leaking or noisy → Shop the thermostat at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the Overheating code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Toyota manual is on Toyota's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Toyota Sedan Corolla (E140/E150, 2009–2010) error codes

See all Toyota Corolla (E140/E150, 2009–2010) codes & guides →