Toyota Sedan Camry (XV50, 2013–2013) Vibrates when braking

What this problem usually means

RepairPal lists warped front brake rotors as a common Camry problem: the steering wheel shudders under braking, especially from highway speed. It is a rotor thickness-variation problem, not a steering fault, and it is one of the cheapest vibrations to fix on the car.

Likely causes

  1. Warped/uneven front brake rotors → Shop the brake rotors at Amazon
  2. Uneven lug nut torque distorting the rotors
  3. Sticking brake caliper overheating one rotor → Shop the brake caliper at Amazon
  4. Worn pads worn down to the backing plate

How to fix it — step by step

  1. Confirm the shake happens only while braking; a shake at steady speed is tires or alignment instead
  2. Inspect pad thickness and rotor condition; measure rotor runout if you have a dial indicator
  3. Replace rotors and pads as a pair per axle, and torque the lug nuts evenly in a star pattern to the specified value
  4. Check that both calipers release properly so the new rotors are not overheated by a dragging caliper

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Toyota manual is on Toyota's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Toyota Sedan Camry (XV50, 2013–2013) problems

See all Toyota Camry (XV50, 2013–2013) codes & guides →