Toyota Sedan Camry (XV40, 2007–2011) Burning oil

What this problem usually means

The 2007-2011 Camry with the 2.4L 2AZ-FE four-cylinder is notorious for excessive oil consumption caused by low-tension piston rings, with owners reporting roughly a quart burned every 1,000-1,200 miles. Ignored, it can starve the engine of oil and lead to a rebuild or replacement engine.

Likely causes

  1. Worn/low-tension piston rings on the 2.4L 2AZ-FE (2007-2011) → Shop the piston rings at Amazon
  2. Stuck PCV valve increasing oil pull into the intake
  3. Valve stem seal wear at high mileage
  4. External oil leaks mistaken for consumption

How to fix it — step by step

  1. Measure the real rate: fill to the full mark, then check the dipstick every 500 miles and log how much you add
  2. Rule out external leaks (valve cover, oil pan, timing cover) before blaming the rings
  3. Replace the inexpensive PCV valve and re-measure consumption → Shop the pcv valve at Amazon
  4. Ask a Toyota dealer whether the car was ever repaired under Toyota's oil consumption warranty enhancement, and keep records; a documented heavy burner needs ring/piston work, which is major engine work

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Toyota manual is on Toyota's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Toyota Sedan Camry (XV40, 2007–2011) problems

See all Toyota Camry (XV40, 2007–2011) codes & guides →