Toyota Sedan Camry (1990–2017) Transmission hesitates when accelerating

What this problem usually means

The single most reported Camry problem on RepairPal, with over 540 owner reports across most model years up to 2017, is an automatic transmission that hesitates when accelerating. Causes range from a simple software/fluid issue to a transmission that is genuinely wearing out at high mileage.

Likely causes

  1. Transmission shift programming and throttle tip-in calibration
  2. Old or low transmission fluid
  3. Worn clutch packs in high-mileage transmissions
  4. Engine performance problem (weak acceleration blamed on the transmission)

How to fix it — step by step

  1. Confirm the engine itself is healthy first: a dirty MAF sensor or weak plugs make the car feel like the transmission is hesitating
  2. Check the transmission fluid level and condition where a dipstick is fitted, or have it inspected on sealed units → Shop the transmission fluid at Amazon
  3. Ask a dealer about software updates for shift feel for your model year
  4. If hesitation comes with slipping, flaring revs or burnt-smelling fluid, have a transmission shop evaluate it before it fails completely

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Toyota manual is on Toyota's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Toyota Sedan Camry (1990–2017) problems

See all Toyota Camry (1990–2017) codes & guides →