Toyota RAV4 Clunking noise when turning

What this problem usually means

2006-2008 RAV4s are documented for a steering intermediate shaft clunk, a knocking or clunking felt through the steering wheel at low speed over bumps or while turning. It is a wear item in the steering column shaft rather than a rack failure in most cases.

Likely causes

  1. Worn steering intermediate shaft (2006-2008 cars)
  2. Worn sway bar links (a similar clunk, cheaper to fix)
  3. Strut mount bearing wear
  4. Loose or worn tie rod ends

How to fix it — step by step

  1. Note when it clunks: low-speed turns over uneven ground point to the intermediate shaft or links
  2. Inspect sway bar links first; they are cheap, common, and easy to check for play
  3. Have the front end checked for tie rod and ball joint play on a lift
  4. If the links and joints are tight, the intermediate shaft is the likely source and is replaced as an assembly

Parts that commonly fix it

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Toyota RAV4 problems

See all Toyota RAV4 codes & guides →