Toyota Hatchback Prius Brake actuator failure
What this problem usually means
The Prius brake actuator, which controls hydraulic pressure for the brakes, is prone to failure in older models, and NHTSA has tracked various complaints about it. A failing actuator often makes a loud humming or buzzing noise even with your foot off the pedal as its pump struggles to maintain pressure, and in severe cases the pedal feels spongy or hard and stopping power is reduced; moisture absorbed by old brake fluid corrodes the actuator internally.
Likely causes
- internal corrosion of the brake actuator from moisture in old brake fluid
- worn brake actuator pump
How to fix it — step by step
- Stop driving and park safely if the pedal feels spongy or hard or braking power drops
- Listen for humming or buzzing from the actuator with your foot off the pedal
- Have the brake system inspected and the actuator tested by a shop → Shop the brake actuator at Amazon
- Replace the brake actuator and flush the brake fluid - the repair requires professional calibration
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the brake actuator.
Parts that commonly fix it
- brake actuator - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Toyota manual is on Toyota's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.