Toyota Camry Engine stalls while driving
What this problem usually means
Many 2018-2020 Camrys were recalled (NHTSA recalls 20V012 and 20V682) because the in-tank Denso low-pressure fuel pump can fail, causing rough running, a no-start, or stalling while driving. Because it is a recall, the fix is free at a Toyota dealer for covered cars.
Likely causes
- Failing Denso low-pressure fuel pump covered by recall
- Clogged fuel filter or failing pump relay on older cars
- Failing crankshaft position sensor cutting the engine intermittently
- Severe vacuum leak or throttle body fault (usually sets codes first)
How to fix it — step by step
- Check your VIN at nhtsa.gov/recalls first; if the fuel pump recall is open on your car, book the free dealer repair before paying for diagnosis
- Note whether the stall happens hot, cold, or at random, and whether the car restarts immediately, which helps separate pump from sensor faults
- Have stored codes read; a crank sensor fault usually leaves evidence
- If the recall does not apply, have fuel pressure tested before replacing the pump on suspicion
Parts that commonly fix it
- fuel pump - Shop at Amazon
- crankshaft position sensor - Shop at Amazon
- fuel pump relay - Shop at Amazon
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.