Tesla SUV Model X (2016–2020) Yellow border on touchscreen
What this problem usually means
On pre-2021 Model X cars with the older 17-inch centre screen, the adhesive around the display edge breaks down in sun and heat and shows as a yellowing border. It is cosmetic rather than functional and does not affect the touchscreen underneath, but it is a giveaway of an older, unrepaired display.
Likely causes
- Heat and UV degradation of the display's adhesive layer
- Age-related delamination in more advanced cases
How to fix it — step by step
- Ask Tesla about the UV light treatment that cures the adhesive and can reduce or eliminate the border without replacing the screen
- Check for warranty or goodwill coverage, which Tesla has applied in some cases
- If the display is also bubbling or delaminating, a screen replacement is the only complete fix
- Use a windshield sunshade to slow further yellowing
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the touchscreen display.
Parts that commonly fix it
- touchscreen display - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Tesla manual is on Tesla's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.