Tesla Sedan Model S (All models) Air suspension sagging

What this problem usually means

A Model S that sits low on one corner in the morning, leans, or shows an air suspension needs service warning has a leak or a tired compressor. Air springs typically last roughly 130,000-200,000 km; a slow leak makes the compressor run long and loudly to keep up until it burns out as well, turning one failed part into two.

Likely causes

  1. Leaking air spring/strut, usually at one corner
  2. Compressor worn out from overwork compensating for a leak
  3. Leaking air line or valve block
  4. Failed ride height sensor giving false readings → Shop the ride height sensor at Amazon

How to fix it — step by step

  1. Note the pattern: sagging at one corner after sitting overnight points to that corner's air spring, while the whole car sitting low points to the compressor or a main line
  2. Listen for the compressor running far longer or louder than usual, the sign it is chasing a leak
  3. Do not ignore it; every week of driving on a leak overworks the compressor and adds it to the repair bill
  4. The fix is a leak test, replacement of the failed strut, line, valve block or compressor, and a ride-height recalibration, which is specialist work with the car on a lift

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Tesla manual is on Tesla's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Tesla Sedan Model S (All models) problems

See all Tesla Model S (All models) codes & guides →