Tesla Model 3 Frunk won't open
What this problem usually means
With a dead low-voltage battery, a Model 3 cannot open the frunk with the app, key or screen, which is a trap because the 12V battery you need to reach lives under the frunk. Tesla provides external jump terminals behind the front tow-eye cover specifically for this situation.
Likely causes
- Dead 12V battery (by far the most common cause)
- Failed frunk latch actuator (suspect this only if the 12V system is alive)
- Frozen or misaligned frunk latch in winter
How to fix it — step by step
- Pop the round tow-eye cover on the front bumper and pull out the two frunk release leads
- Touch a 12V jump pack or jumper cables to those leads to pop the frunk; this only releases the latch, it does not jump the car
- Access the 12V battery under the frunk's rear panel and jump or replace it
- If the frunk still will not release with power applied, the latch actuator itself needs service
Parts that commonly fix it
- 12V auxiliary battery - Shop at Amazon
- frunk latch actuator - Shop at Amazon
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.