Subaru Outback Engine stalls when stopping
What this problem usually means
Early CVT Outbacks (around 2010) have documented complaints of the torque converter locking up when braking, which can drag the engine down and stall it as the car comes to a stop, exactly as a manual-transmission car stalls if the clutch is not pressed. It is a converter control problem, not an engine fault.
Likely causes
- Torque converter lock-up clutch not releasing when braking
- CVT valve body fault controlling converter lock-up
- Dirty throttle body causing low-speed stalls (a cheaper sound-alike to rule out)
- Failing crank sensor (usually stalls at other times too)
How to fix it — step by step
- Note whether stalls happen only while braking to a stop, the converter lock-up pattern, or randomly, which points elsewhere
- Clean the throttle body and check for codes first; it is the cheap overlap cause
- Ask a dealer whether any CVT warranty extension or TSB covers your car for converter behavior
- A confirmed converter/valve body fault is transmission work for a specialist
Parts that commonly fix it
- torque converter - Shop at Amazon
- valve body - Shop at Amazon
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.