Speed Queen Washer Er LE

What this problem usually means

Water leak drain error on Speed Queen electronic-control washers: during the leak detection step (where enabled), the water level dropped more than the acceptable amount, suggesting a leak.

Likely causes

  1. Leaking fill or drain hose connection
  2. Leaking mixing (inlet) valve
  3. Tub or pump leak
  4. Water siphoning out through a low drain hose

How to fix it — step by step

  1. Look for water under the washer and at all hose connections
  2. Turn off the water supply if you find an active leak
  3. Tighten or replace any leaking hose connection you can reach safely
  4. Call a technician if the leak source is inside the machine

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Speed Queen washer problems

See all Speed Queen washer codes & guides →