Sony TV AZ1-L / AZ2 / GN1T chassis (e.g. KDL-EX700, KDL-EX720/BX420, XBR-X830C) 3 Blinks
What it should look like on your machine
then it repeats
3 blinks - then the pattern repeats. Count along with your machine and compare.
What this problem usually means
The red standby LED blinks three times, pauses, and repeats, indicating a DC alert — the TV is not receiving correct voltages on one or more rails — pointing to a main board or power supply board fault on Sony Bravia LCD/LED models. Blink meanings vary by model and generation, so always confirm against your exact model's service documentation.
Likely causes
- Power supply board not outputting correct DC voltages
- Failed main board
- Audio abnormal detection / audio protection fault on some models
- Loose speaker or HDMI connections triggering protection on some models
How to fix it — step by step
- Disconnect all external devices including HDMI cables, then perform a power reset: unplug the TV for 2 minutes and plug it back in
- Check for standby voltage from the power supply board — if standby voltage is present and correct, the main board is the next suspect → Shop the power supply board at RepairClinic → Shop the main board at RepairClinic
- Inspect speaker connections on the main board and reseat them if loose
- Try a software update via USB from Sony's support site for your exact model if the TV will stay on long enough
- Replace the power supply board first if voltages are wrong, otherwise replace the main board matched to your exact model number
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the power supply board.
Shop the power supply board at RepairClinic or Amazon
Also tied to this fault: main board - Shop at RepairClinic or Amazon
Parts that commonly fix it
- power supply board - Shop at RepairClinic or Amazon
- main board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.