Sony TV AZ1 / AZ2 / AZ3 / GN1T chassis (most KDL-EX/BX/HX and XBR-X830C-era models) 5 Blinks
What it should look like on your machine
then it repeats
5 blinks - then the pattern repeats. Count along with your machine and compare.
What this problem usually means
The red standby LED blinks five times, pauses, and repeats, indicating a bad LCD panel connection, an internal LCD panel short, or a T-Con communication error on Sony Bravia LCD/LED models. Blink meanings vary by model and generation, so always confirm against your exact model's service documentation.
Likely causes
- Loose or oxidized ribbon cable between main board, T-Con board, and panel
- Failed T-Con board
- Internal LCD panel short circuit
- Panel ID / panel power error on some models
How to fix it — step by step
- Perform a power reset: unplug the TV for 2 minutes, then plug back in and retest
- Unplug the TV, wait at least 5 minutes, remove the back cover and firmly reseat all ribbon cables connecting the main board to the T-Con board and the T-Con board to the panel, cleaning oxidized flat-flex contacts with isopropyl alcohol → Shop the lcd panel ribbon cables at RepairClinic → Shop the t-con board at RepairClinic
- Gently squeeze the bezel edges — a loose panel connection can sometimes be temporarily restored this way, which helps locate the fault
- Replace the T-Con board matched to your exact model if reseating cables does not help
- If a new T-Con board does not fix it, the LCD panel itself is faulty and replacement is generally not cost-effective
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the T-Con board.
Shop the T-Con board at RepairClinic or Amazon
Also tied to this fault: LCD panel ribbon cables - Shop at RepairClinic or Amazon
Parts that commonly fix it
- T-Con board - Shop at RepairClinic or Amazon
- LCD panel ribbon cables - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.