Sony TV AZ1 / AZ2 / AZ3 chassis — CCFL/fluorescent-backlit balancer models 4 Blinks
What it should look like on your machine
then it repeats
4 blinks - then the pattern repeats. Count along with your machine and compare.
What this problem usually means
The red standby LED blinks four times, pauses, and repeats, indicating a Panel Balancer Error on AZ1/AZ2/AZ3-chassis Sony Bravia LCD models (e.g. KDL-32FA600, KDL-EX357/EX457, KDL-EX720). Sony's AZ2 service manual states explicitly that LED-backlit models do not use the 4-blink balancer error, because the balancer circuit exists only in fluorescent (CCFL)-backlit models; and the GN1T-chassis manual (XBR-X830C, 2015) lists no 4-blink detection item at all. The 'LD board / LED driver' meaning sometimes attached to 4 blinks comes from third-party tables, not from these chassis manuals — do not apply this entry to LED-backlit or GN1T/Android-era sets.
Likely causes
- Failed balancer board on CCFL/fluorescent-backlit models
- Failed LCD panel (balancer error location in AZ1-K table)
- Inverter board fault (ETC-Inverter MT board in AZ1-K table)
- Inverter board wiring arcing to ground on older models
How to fix it — step by step
- Perform a power reset: unplug the TV for 2 minutes, then plug back in and retest
- Confirm your model is actually a balancer-equipped (CCFL-backlit) AZ-chassis set — if it is LED-backlit or a GN1T/Android-era model, this code does not apply and the fault lies elsewhere
- Unplug the TV, wait at least 5 minutes, remove the back cover and check inverter/balancer board wiring for arcing damage or loose connectors → Shop the balancer board at RepairClinic → Shop the inverter board at RepairClinic
- Replace the balancer or inverter board matched to your exact model if it is faulty, or have the panel checked by a technician
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the balancer board.
Shop the balancer board at RepairClinic or Amazon
Also tied to this fault: inverter board - Shop at RepairClinic or Amazon; main board - Shop at RepairClinic or Amazon
Parts that commonly fix it
- balancer board - Shop at RepairClinic or Amazon
- inverter board - Shop at RepairClinic or Amazon
- main board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.
Related Sony TV AZ1 / AZ2 / AZ3 chassis — CCFL/fluorescent-backlit balancer models problems
See all Sony AZ1 / AZ2 / AZ3 chassis — CCFL/fluorescent-backlit balancer models codes & guides →