Shark Robot vacuum ION Series ALL LED LIGHTS are off
What this problem usually means
Listed in the Shark ION Robot owner's guide error chart (unnumbered — ION models do not use error numbers): all LED lights are off because the robot is in Sleep Mode, the power switch is turned off, or there is no charge remaining.
Likely causes
- Power switch turned off (O)
- Robot in Sleep Mode
- Battery completely discharged → Shop the battery at Amazon
How to fix it — step by step
- Turn the power switch on (I)
- Press any button to make sure the robot is not in Sleep Mode
- If all indicator lights remain off, place the robot on the dock, leaving a half-inch space between the front of the robot and the face of the dock, to charge it
- Wait for the charge indicator lights to cycle/appear before starting cleaning
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the battery.
Parts that commonly fix it
- battery - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Shark manual is on Shark's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.