Shark Robot vacuum CLEAN (BLUE) + ! (RED) flashing
What this problem usually means
Error number 2 in Shark IQ manuals: blockage in the brushroll. Shown by CLEAN blue and ! red flashing (some models show the brushroll blockage with CLEAN red + ! alternating instead).
Likely causes
- Hair, string or carpet fibres wrapped around the brushroll
- Object jammed in the brushroll housing
- Brushroll end caps clogged with debris
How to fix it — step by step
- Turn the robot off and turn it over
- Remove the brushroll and pull off all hair and debris from around and inside it
- Clear the brushroll housing and end caps, then refit the brushroll
- Restart cleaning
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Related Shark robot vacuum problems
- CLEAN (BLUE) + DOCK (RED) flashing
- CLEAN (BLUE) + DOCK (RED) solid
- CLEAN (RED) + ! (RED) flashing
- CLEAN (RED) + DOCK (BLUE) + ! (RED) flashing
- CLEAN (RED) + DOCK (BLUE) alternating
- CLEAN (RED) + DOCK (BLUE) flashing
- CLEAN (RED) + DOCK (RED) + ! (RED) flashing
- CLEAN (RED) + DOCK (RED) flashing
- CLEAN (RED) flashing
- CLEAN (WHITE) + DOCK (RED) + ! (RED) flashing
- DOCK (RED) + ! (RED) flashing
- DOCK (RED) flashing