Samsung Robot vacuum POWERbot ! Error Code
What the ! code means
The POWERbot is caught, stuck, trapped or lifted while moving (shown as the ! indicator, also listed as C00).
Likely causes
- Robot is caught, stuck, trapped or lifted while moving
How to fix it — step by step
- Turn the emergency switch off
- Move the POWERbot to another area
- Turn the emergency switch back on
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the ! code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Samsung manual is on Samsung's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.