Samsung Robot vacuum POWERbot R Series C05 Error Code

What the C05 code means

Bumper sensor needs to be checked.

Likely causes

  1. Bumper sensor fault
  2. Foreign object between the main body and the bumper

How to fix it — step by step

  1. Turn off the emergency switch, then turn it back on
  2. Check for foreign objects between the main body and the bumper
  3. If there is one, pull the bumper slightly and remove the foreign object
  4. Turn the emergency switch back on

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the C05 code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Samsung manual is on Samsung's support site — you'll need your model number.

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related Samsung Robot vacuum POWERbot R Series error codes

See all Samsung POWERbot R Series codes & guides →