Samsung Oven C-30 Error Code

What the C-30 code means

Main PCB sensor fault: the main PCB sensor is open when the oven is operating, or there is a short in the main PCB sensor.

Likely causes

  1. Main PCB sensor open
  2. Main PCB sensor shorted / failed NTC on the board
  3. Board wiring fault

How to fix it — step by step

  1. Press OFF and restart the oven
  2. If the problem persists, disconnect all power to the range for at least 30 seconds and reconnect
  3. If it returns, call for service; service data says the main PCB is replaced for this fault

Parts that commonly fix the C-30 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Samsung oven error codes

See all Samsung oven codes & guides →